礦物絕緣電纜BTLY（廣州南洋電纜）

一、產品特點及用途Product features and uses

本產品適用于額定電壓1KV（Um=1.2KV）的配電網或工業裝置中。

This product is applicable for the ratedvoltage 1kV(Um =1.2kV) power distribution network or industrial equipments.

產品標準Product standards:GB/T 12706.1、GB/T 19666

二、產品使用特點Product Usage Characteristics

1、  額定電壓UO/U為0.6/1KV,

Rated voltage UO/U is 0.6/1KV

2、  電纜導體的長期工作溫度等級為90℃

Conductor temperature allowd during long term operation is 90℃

3、短路時（最長持續5秒S）,導體最高溫度不超過250℃。

When max short circuit in 5s, maxconductor temp not exceed 250℃.

4、  電纜敷設溫度應不低于0℃

Installation temperature is not lower than0 and

5、電纜安裝時的最小允許彎曲半徑見下表。

Min bending radius allowed is as below.

( D-the diameter of cable )

電纜安裝時的最小彎曲半徑Minimum bending radius when cable installed

注：D為電纜外徑。Note：D is the cable diameter